JULABO SC 10000w Professional Series Recirculating Coolers - Manual (Page 69)

Recirculating Cooler
69
Command Parameter Response of recirculating cooler
out_mode_08 1 Set the control dynamics - standard
out_sp_00 xxx.xx Set working temperature. „SETP 1“
out_sp_01 xxx.xx Set working temperature. „SETP 2“
out_sp_02 xxx.xx Set working temperature. „SETP 3“
out_sp_03 xxx.xx Set high temperature warning limit „OVERTEMP“
out_sp_04 xxx.xx Set low temperature warning limit „SUBTEMP“
out_sp_06 xxx.xx Set manipulated variable for the heater via serial interface
-99.99 ... +100 [%]
out_sp_07 x Set the pump pressure stage. (1 ... 4)
out_par_04 x.x CoSpeed 0 ... 5.0 Band limit during external control.
Setting the maximum difference between the temperatures
in the internal bath and external system.
out_par_06 xxx Xp control parameter of the internal controller. 0.1 ... 99.9
out_par_07 xxx Tn control parameter of the internal controller. 0 ... 9999
out_par_08 xxx Tv control parameter of the internal controller. 0 ... 999
out_par_09 xxx Xp control parameter of the cascade controller. 0.1 ... 99.9
out_par_10 xxx Proportional portion of the cascade controller. 1 ... 99.9
out_par_11 xxx Tn control parameter of the cascade controller. 0 ... 9999
out_par_12 xxx Tv control parameter of the cascade controller. 0 ... 999
out_par_13 xxx Maximum internal temperature of the cascade controller.
out_par_14 xxx Minimum internal temperature of the cascade controller.
out_par_15 xxx Band limit (upper) 0 ... 200 °C
out_par_16 xxx Band limit (lower) 0 ... 200 °C