JULABO SC 10000w Professional Series Recirculating Coolers - Manual (Page 32)

Menu functions
32
9. Menu functions
The term „menu functions“ refers to adjustments such as
 PUMP Electronically adjustable pump capacity page 33
 CONTROL Intelligent Cascade Control, control parameters
page 34
CONTROL - internal or external control
ELFTUNING
DYNAMIC - internal
COSPEED - external
Control parameters - XP, TN, TV internal
Control parameters - XP, TN, TV, XPU external
 CONFIG
Configurationen of the unit
page 40
SET (Setpoint) – keypad control or remote control
A-START – Autostart
OFF MODE – Motor on / off
RESET – Factory settings
ACTVAR – actuating variable
TIME / DATE – Setting time and date
 SERIAL
Adjustable interface parameters
page 46
BAUDRAT, H-SHAKE, PARITY
(Baud rate, Handshake, Parity)
 LIMITS
Limits to temperature or capacity page 47
SET MAX / MIN - Maximum and minimum setpoint
HEAT MAX - Adjusted maximum heating
COOL MAX - Adjusted maximum cooling
INTERN MAX / MIN – Limitation of the working temperature range
BAND HIGH / LOW – Band limit
 PROGRAM Integrated programmer
page 49
 ADJUST ATC - Absolute Temperature Calibration, page 53
Sensor calibration, 3-point calibration
 ANALOG
Indication only when
the Analog Interface
Modul is mounted.
Analog inputs/outputs page 57
F-ALARM – Function at Alarm
A-ALARM – Type of Alarm
EX-STBY - STAND-BY input
CHANNEL – Output 1, 2, 3
EPROG – External programmer input