JULABO SC 10000w Professional Series Recirculating Coolers - Manual (Page 35)

Recirculating Cooler
35
1. Press the button until the submenu >CONTROL< is displayed.
2.
Select the parameter with the keys (INT / EXT).
3. Press enter to store the selected parameter.
Continue: Press or
Notice:
Place the external sensor into the bath medium and securely fix the sensor.
Pt100
IMPORTANT:
Additional measures for external temperature control.

For external control and temperature measurement an external
Pt100 sensor must be connected to the socket (17) on the rear of the
recirculating cooler.

Suggested adjustments for external temperature control:
BAND HIGH / LOW and INTERN MAX / MIN
see chapter > LIMITS < on page 47.

Sensor calibration of the external Pt100 sensor is carried out in the
>MENU / ADJUST<, in the submenu >ATC SEN / EXT<
(see page 53).
Pt100 M+R
Accessory: Pt100 external sensor
Order No. Description Material Cable
8981003 200x6 mm Ø, stainless steel 1.5 m
8981005 200x6 mm Ø, glass 1.5 m
8981006 20x2 mm Ø, stainless steel 1.5 m
8981010 300x6 mm Ø, stainless steel 1.5 m
8981015 300x6 mm Ø, stainless steel / PTFE coated 3 m
8981013 600x6 mm Ø, stainless steel / PTFE coated 3 m
8981016 900x6 mm Ø, stainless steel / PTFE coated 3 m
8981014 1200x6 mm Ø, stainless steel / PTFE coated 3 m
8981103 Extension cable for Pt100 sensor 3.5 m
8981020 M+R in-line Pt100 sensor
The M+R in-line Pt100 sensor is a flow sensor and can be installed loop
circuit