JULABO SC 10000w Professional Series Recirculating Coolers - Manual (Page 27)

Recirculating Cooler
27
7. Setting the temperatures
Factory settings:
SETP 1 25 °C
SETP 2 37 °C
SETP 3 70 °C
Press the key to call up the menu for temperature selection.
3 different working temperatures are adjustable. Their values are freely
selectable within the operating temperature range.

This setting may be carried out with the recirculating cooler being in the
Start or Stop condition!
Example: Setting working temperature "SETP oint 3"
XXXXX
SETP 3
70.0
XXXXX
SETP 3
85.0
1. Press the key until the desired menu window is indicated on the
VFD COMFORT-DISPLAY
Example: SETP 3 / 70.0 °C (last digit blinks)
2.
Change the value to 85 °C.
Use the cursor keys to move left or right on the display until the
numeral you wish to change blinks.
Use the increase/decrease arrows
to change the selected
numeral (-, 0, 1, 2, 3, ... 9).
see example left: SETP 3 / 85.0.
3. Press enter to store the value.

In the >Start< condition this value is immediately used for controlling the
working temperature.
The indication on the VFD COMFORT-DISPLAY is updated.
The heater control indicator blinks.

Notice:
See SETMAX and SETMIN in chapter 9.5. MENU LIMITS
Example: Selecting the working temperature
SETP 1
SETP 2
SETP 3
1. Press the key until the desired menu item is indicated on the VFD
COMFORT-DISPLAY.
2. Press enter .

The recirculating cooler uses the new working temperature value for
temperature control.