JULABO SC 10000w Professional Series Recirculating Coolers - Manual (Page 18)

Operating controls and functional elements
18
12
RS232
Interface RS232: remote control via personal computer
Option: Electronic module
13
ALARM
Alarm output (for external alarm signal)
14
STAND-BY
Standby input (for external emergency switch-off)
15
REG+E-PROG
Programmer input and temperature recorder output
16
ext Pt100
Socket for external measurement and control sensor
or external setpoint programming
19 2 Connectors for solenoid valve. 230 V / max. 0.1 A
No control voltage in the -OFF- condition
20 4 Safety cutouts: Mains fuses 16 A (with option H5)
2 Safety cutouts: Mains fuses 10 A
0
1
Motor protection circuit breaker for compressor motor
21 Mains power cable with plug
22
23
Pump connectors: 3/4” NPT male
OUT / Feed IN / Return
24 Overflow connector, M10x1 female
Order-No. 8 970 460
Barbed fitting for tubing 8 mm inner dia.

Closable when using e.g. 3M Fluorinert ® as temperature liquid.
25
Discharge nozzle with cap nut, Connection: ½ " male
Recommendation:
Before filling please install a drain cock at the discharge nozzle.
(not included in delivery)
Order-No. 8 920 100 Drain cock, stainless steel
26 OUT IN
Only for water cooled models: Cooling water OUTLET and INLET