JULABO Magnum 91 Temperature System - Manual (Page 48)

Menu functions
48
8.4. Integrated programmer
The integrated programmer allows any desired temperature program
sequences to be realized. Such a temperature sequence is called profile.
A profile consists of individual sections defined by duration (t:) and target
temperature. Target temperature is the setpoint (T:), that is achieved at
the end of a section. The programmer uses time and temperature
difference values within a section to calculate a temperature ramp.
Control param.
Profile Start
Int.Programmer
Inputs/Outputs
Limits
Interface
Temp.Sensor
Int.Programmer
>Edit
Delete
Set Clock
 Press enter to select the submenu "Int. Programmer".
 Use the up/down cursor keys to select the desired option.
Then press enter to open.
A flashing segment indicates that a number or value needs to be
entered.
Edit Compile
profiles
Display sections
Delete Delete sections
Set clock Set the real time on the instrument
Int.Programmer
Edit
Delete
>Set Clock
>hour.min 11:09
Day.mon 18.04
Year 1997
Examples:
Setting clock
The integrated clock allows starting a profile at any date and time. The
clock is preset in the factory.
 Lines 1 to 3:
Check for correctness of the preset date and time and correct if
necessary.
The time is diplayed permanently in line 4.
 Use the numerals to set time, date and year and set each entry with
enter .
 Press escape
ESC
to return to the previous menu level.