JULABO Magnum 91 Temperature System - Manual (Page 46)

Menu functions
46
Example: hour.min 6:00 h
>hour.min 06:00
Day.Mon 15:11
Year 1997
Start yes
Starttime: 06:00
Date: 15:11
*** wait ***
acttime 02:32:56
 When selecting the parameter time, a new menu level is called up
for entry of the start time.
A flashing segment indicates that a start time needs to be entered.
hour.min
Start time
Day.Mon day and month
Year year
Set each entry with enter .
Start
no / yes
A flashing line indicates that the parameter "yes" needs to be
entered.
Press the P-key to select the parameter and press enter
.
 The temperature system switches to waiting mode and a flashing
line "wait" appears on the DIALOG-DISPLAY (LCD). The start time
and actual time are permanently indicated on the display.
Setp. : xx.xx°C
IntAct: xx.xx°C
Prof. : x Stp: x
Remain: xx:xx:xx
Setp. : xx.xx°C
ExtAct: xx.xx°C
Prof. : x Stp: x
Remain: xx:xx:xx
Int
S 120.00
E 120.00
Indication after starting the profile:
DIALOG-DISPLAY (LCD)
1st line: Setpoint of the programmer
2nd line: Actual temperature value
at internal control = IntAct: xxx.xx
at external control = ExtAct: xxx.xx
3rd line: Selected profile and the actual section
4th line: Remaining time of the actual section
VFD-Info-Display:
 Line 1 indicates the actual temperature value.
In the header the corresponding symbol >Int< or >Ext< is
illuminated.
 Press the key to swap the values in line 1 and line 3.