HYDAC CMU 1000 - Manual (Page 78)

Condition Monitoring Unit CMU 1000 Page 78
Revised 17.12.2009 HYDAC ELECTRONIC GMBH Mat.-No.: 669749
6.2 Window Divisions
The graphics interface of the CM Editor is divided into the following elements:
6.2.1 "Function Properties" Window
The properties of the functions currently selected in the CM program are displayed in
this window. These include:
• Function name (e.g. Action 2; Constant 5; Measured value 12)
• Function type (z.B. Constant, Measured value, Timer)
• Specific properties (parameter settings)
• Comment
6.2.2 "Function List" Window
This window lists all of the functions used in the CM program with the following
specifications:
• Function type (z.B. Constant, Measured value, Timer)
• Function name (e.g. Action 2; Constant 5; Measured value 12)
• Inscription (e.g. Working pressure N.I.O.)
6.2.3 "Linked Functions" Window
This window contains the actual CM program. The display can be zoomed in or out
with the scroll bar on the lower edge of the window.
6.2.4 "Functions" Window
This window contains all of the functions available for program generation, sorted
according to:
• Data sources
• Calculations
• Numerical operations
• Conditions
• Links
• Boolean operations
• Result values/actions
• Other