HYDAC CMU 1000 - Manual (Page 52)

Condition Monitoring Unit CMU 1000 Page 52
Revised 17.12.2009 HYDAC ELECTRONIC GMBH Mat.-No.: 669749
Network settings
If the CMU 1000 is integrated in a network at the customer site, then the following
settings need to be carried out in accordance with this network:
• IP Address [enter IP Address]
• Subnetwork mask [enter Subnetwork mask]
• Gateway Address [enter Gateway Address]
• MAC Address [permanently set at the factory, read-only]
Example:
Peripherals - Channel Settings
• Channel A to Channel H (HSI channels)
- Name [Enter name]