HYDAC CMU 1000 - Manual (Page 77)

Condition Monitoring Unit CMU 1000 Page 77
Revised 17.12.2009 HYDAC ELECTRONIC GMBH Mat.-No.: 669749
6.1.7 Extras
• The following window opens with the function Options is selected:
The selection buttons at the right-hand edge of the window appear after clicking
in the respective selection field.
- In the Language field, you can select between the options of German, English
and French for choosing the CMWIN system language.
- In the field Working folder you define the path for saving the CMWIN files
(CM programs, recordings, constellation and configuration files, ...).
- In the field Name as inscription you define whether or not the respective
function name (e.g. Measured value 2, Action 4) is to be displayed as function
inscription in the "Linked functions" window.
If "No" is selected, then you have the option of entering an inscription text
manually into the function parameters.
- In the field Frame group you define whether or not a frame is to appear
around generated groups in the CM program.
- Clicking on OK applies the settings and returns you to the main CMWIN
window.
Pressing Cancel takes you back without applying any changes.
• By using the Reset Options function you can reset all the modified options and
settings to the standard settings.
• Selecting the Display cycle time function causes the following window to open
and the current cycle time of the CM program to be displayed.
Example: