HYDAC CMU 1000 - Manual (Page 111)

Condition Monitoring Unit CMU 1000 Page 111
Revised 17.12.2009 HYDAC ELECTRONIC GMBH Mat.-No.: 669749
7.10.9 Send SMS
The Send SMS function is used to send an SMS when an event
occurs. This occurs with every switchover of the input value changes
from "0" to "1".
The text of the SMS is defined with the Message parameter and the
Telephone number
parameter defines the number to which the SMS
is sent.
Inputs: x: (Boolean)
Outputs: -
Parameters: p
1
: Telephone number (character string)
p
2
: Message (character string)
Caution
The "Send SMS" function requires that the following conditions be
met:
- One HYDAC GSM Module CSI-F-10 is connected to the HSI
Master of the CMU 1000 in accordance with specifications.
- The GSM module CSI-F-10 is supplied with voltage and ready for
functioning.
- A valid, functionable SIM card has been inserted in the GSM
module CSI-F-10.
- The GSM module has a sufficient network reception strength.
7.11 Other
7.11.1 Comment
With the Comment function, it is possible to insert a comment at any
given point in the CM program.
The heading of the Comment box is defined with the Inscription
parameter.
The actual comment text is entered with the Comment parameter.
Inputs: -
Outputs: -
Parameters: p
1
:
Inscription
(character string)
p
2
: Comment (character string)