HYDAC CMU 1000 - Manual (Page 40)

Condition Monitoring Unit CMU 1000 Page 40
Revised 17.12.2009 HYDAC ELECTRONIC GMBH Mat.-No.: 669749
• Successful establishment of the connection will be signaled as shown below:
• End the connection setup by confirming with OK.
• In the CM Manager under Actions / Performing a Dialog / Permissions, open
the following input window and input the mobile phone number authorized for
accessing the CMU 1000.
• Permissions
Number [input telephone number with country code]
Write [allow written access]
You can input up to five telephone numbers to which the CSI-F-10 may send
messages and from which the device may receive enquiry text messages.
By placing a checkmark in the "Text" box, you are also allowing access by text
to the CSI-F-10 from this telephone number (change settings, transfer CM
program, update firmware, ...)
Click on "Apply", to apply the settings. "Back" takes you back to the main
menu.