EUCHNER AS-i Safety Monitor for 2 AS-i circuits - Manual (Page 90)

90 Subject to reasonable modifications due to technical advances Id.-No.: 103336 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
AS-i Safety Monitor for 2 AS-i circuits
Diagnostics for AS-i Monitor and networking using AS-i Master
Bit field coding for devices which changed in the last step:
The numbers indicate the position of the bit for the corresponding device.
0: Device did not change in the last step
1: Device changed in the last step
Bit field coding for devices which are present:
The numbers indicate the position of the bit for the corresponding device.
0: Device is not present
1: Device is present
11.4.3.6 Vendor-Specific Object 11 ... 70
Objects 11 … 70 correspond to objects 7 … 10, but refer to the following release
circuits. The table shows the relationship:
Byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
1 7 6 5 4 3 2 1 0
2 15 14 13 12 11 10 9 8
… …
32 255 254 253 252 251 250 249 248
Tab. 11-23.
Byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
1 7 6 5 4 3 2 1 0
2 15 14 13 12 11 10 9 8
… …
32 255 254 253 252 251 250 249 248
Tab. 11-24.
OSSD Device Colors Device Colors
with compo-
nent index Device Colors
at Switch off Device Colors
at Switch off
with compo-
nent index
Pre-proc. Object 3 Object 4 - -
1 Object 7 Object 8 Object 9 Object 10
2 Object 11 Object 12 Object 13 Object 14
3 Object 15 Object 16 Object 17 Object 18
4 Object 19 Object 20 Object 21 Object 22
Tab. 11-25.