EUCHNER AS-i Safety Monitor for 2 AS-i circuits - Manual (Page 15)

AS-i Safety Monitor for 2 AS-i circuits
Safety
Subject to reasonable modifications due to technical advances Id.-No.: 103336 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG 15
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
3.3.4 Qualified personnel
Installation, commissioning and maintenance of the devices are to be performed
only by qualified specialists.
Electrical work is to be performed only by electrical technicians.
Setting and changing the device configuration via PC and ASIMON 3 G2 configu-
ration software are to be performed only by an authorized safety representative.
The password for changing a device configuration must be kept under lock and
key by the safety representative.
3.3.5 Repair
Repairs, in particular opening of the housing, are to be performed only by the
manufacturer or by an authorized representative of the manufacturer.
3.4 Disposal
Information!
Electronic waste is hazardous waste. Please comply with all local ordinances when
disposing this product!
The device does not contain batteries that need to be removed before disposing it.