EUCHNER AS-i Safety Monitor for 2 AS-i circuits User Manual
Page 73
AS-i Safety Monitor for 2 AS-i circuits
Operation in advanced display mode
Subject to reasonable modifications due to technical advances
Id.-No.: 103336
Issue date - 24.10.2008
EUCHNER GmbH + Co. KG
73
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen
Tel. +49/711/75 97-0 • Fax. +49/711/753316
The FAULT DETECTOR menu displays information about the AS-i detector and
allows you to delete the history of the AS-i Monitor. Also, the HELP section de-
scribes the abbreviations in full.
By selecting RESET you can delete the history of the AS-i Monitor.
The HISTORY section lists the fault messages which have occurred for the AS-i
Monitor since the last RESET.
The CURRENT section lists the current fault messages for the AS-i Monitor since
the last RESET.
The following fault messages are displayed:
•
Duplicate addressing (shows the 2 lowest slave addresses for which there is
duplicate addressing)
•
Earth faults
•
Noise
•
Overvoltage
FAULT DETECTOR
RESET
HISTORIC:
EFLT OVRV NOIS
ACTUAL:
EFLT OVRV NOIS
DUP ASI ADR:
0 | 31B
HELP:
EFLT EARTH FAULT
OVRV OVERVOLTAGE
NOIS NOISE
DUP ASI ADDR
DUPLICATE ASI
SLAVE ADDRESS