EUCHNER AS-i Safety Monitor for 2 AS-i circuits - Manual (Page 60)

60 Subject to reasonable modifications due to technical advances Id.-No.: 103336 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
AS-i Safety Monitor for 2 AS-i circuits
Operation in advanced display mode
9.3.7 SAFE CHIPCARD
Main Menu || AS-I SAFETY || SAFE CHIPCARD ||
In this menu you can manage the safe area of the chip card.
9.3.7.1 VIEW BANK X CONFIG (view active bank)
Main Menu || AS-I SAFETY || SAFE CHIPCARD || VIEW || SELECT BANK || BANK X CONFIG ||
Information!
The default setting for the PIN is “0000” and must not be changed.
SAFE CHIPCARD
ACTIVE: BANK B
VIEW
CARD -> MONITOR
MONITOR -> CARD
CLEAR CODES
CLEAR SAFE CARD
ACTIVE: BANK X Displays the active bank on the chip card.
VIEW: Reads out the safety configuration of a chip card bank.
CARD->MONITOR: Copies the configuration of a chip card bank to the Monitor.
MONITOR->CARD: Copies the Monitor configuration to a chip card bank.
CLEAR CODES: Deletes the safety configuration on the Monitor.
CLEAR SAFE
CARD:
Deletes a safe memory bank on the chip card.
SELECT BANK
A
OK