EUCHNER AS-i Safety Monitor for 2 AS-i circuits - Manual (Page 77)

AS-i Safety Monitor for 2 AS-i circuits
Operation in advanced display mode
Subject to reasonable modifications due to technical advances Id.-No.: 103336 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG 77
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
9.5.2 Language (menu language)
Main Menu || SETUP || LANGUAGE ||
From this menu you can select the menu language. „X“ marks the currently se-
lected language.
9.5.3 FACTORY RESET (factory default settings)
Main Menu || SETUP || FACTORY RESET ||
This function can be used to reset the master to the factory default settings. The
“Reset” is done by selecting menu point DO RESET.
LANGUAGE
ENGLISH X
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
FACTORY RESET
DO RESET
Warning!
This function should only be used in emergency cases, since all previously made set-
tings are restored to the factory defaults, so that errorless communication and function
of the Monitor with the AS-i circuit can no longer be assured.