EUCHNER AS-i Safety Monitor for 2 AS-i circuits - Manual (Page 14)

14 Subject to reasonable modifications due to technical advances Id.-No.: 103336 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
AS-i Safety Monitor for 2 AS-i circuits
Safety
The device also assumes the mandatory E-STOP function (Stop Category 0 or 1)
for all non-manually operated machines, dynamic monitoring of the restart func-
tion and the protection monitoring function.
Examples for use of the AS-I Safety Monitor:
The device is used economically in machines and equipment in which the stand-
ard AS-I bus is the local bus. Using the Safety Monitor as a bus component al-
lows already existing AS-I bus configurations to be easily expanded, and safety
components having the corresponding AS-i Safety at Work interface can be in-
serted without difficulty. If there is no AS-I Safety at Work interface on the safety
component, so-called coupling modules can be used to establish the connection.
Existing AS-I masters and AS-I power supplies can be used as well.
There are no industry-specific restrictions. Some of the key applications are listed
below:
• Machine tools
• Expanded machining centers with multiple control elements and safety sen-
sors for wood and metal processing
• Printing and paper processing machines, trimming machines
• Packaging machinery, both stand-alone and as systems
• Food and beverage machinery
• Workpiece and bulk material conveying systems
• Rubber and plastics industry processing machinery
• Automatic assembly and handling equipment
3.3 Organizational requirements
3.3.1 Documentation
All the specifications in this System Manual, in particular the sections “Safety In-
structions” and “Commissioning”, must be strictly observed.
All the safety instructions in the manual “ASIMON 3 G2 Configuration Software”
must be strictly observed.
Please note the safety rules when configuring the safety functions, see section
. Checking of the release code and testing
the system must be documented in writing and is part of the system documenta-
tion.
Keep this System Manual in a safe location where it can be readily accessed. It
should always be available.
3.3.2 Traceability of the devices
The ordering party is responsible for ensuring traceability of the devices by serial
number!
3.3.3 Safety regulations
Observe the locally prevailing legal regulations and requirements of the trade as-
sociations.