EUCHNER AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor for 2 AS-i circuits - Manual (Page 97)

AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Operation in advanced display mod
Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG 97
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
9.6.5 FAULT DETECTOR
Main menu || DIAGNOSIS || FAULT DETECTOR ||
The menu "Fault Detector" displays information about the AS-i fault detector and
permits deleting the AS-i fault detector´s history. Furthermore, a list of abbrevia-
tions in clear text is displayed in the "Help" section.
By selecting "Reset" the history of the AS-i fault detector can be deleted.
The section "Historic" lists the error messages generated by the AS-i fault detec-
tor since the last "Reset".
The section "Actual" lists the currently present error messages of the AS-i fault
detector.
The following error messages are displayed:
• Duplicate address (displaying of 2 lowest slave addresses with duplicate
addresses)
• Earth faults
• Noise
• Over-voltage
Optionally, the absence of the redundant 24V for some single masters may be
displayed.
FAULT DETECTOR
RESET
HISTORIC:
EFLT OVRV NOIS
ACTUAL:
EFLT OVRV NOIS
DUP ASI ADR:
0 | 31B
HELP:
EFLT EARTH FAULT
OVRV OVERVOLTAGE
NOIS NOISE
DUP ASI ADDR
DUPLICATE ASI
SLAVE ADDRESS