EUCHNER AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor for 2 AS-i circuits - Manual (Page 126)

126 Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
PROFIBUS DP
A rising edge of F2 and F3 switches the master to the desired mode.
A falling edge initiates deleting all bits in the LOS.
11.1.3.2 EC-Flags and AS-i detector
In addition to EC-flags, the AS-i detector flags are transferred with the AS-i diag-
nostic data.
Diagnostics data is designed as follows:
21 Slave 10B Slave 11B
22 Slave 12B Slave 13B
23 Slave 14B Slave 15B
24 Slave 16B Slave 17B
25 Slave 18B Slave 19B
26 Slave 20B Slave 21B
27 Slave 22B Slave 23B
28 Slave 24B Slave 25B
29 Slave 26B Slave 27B
30 Slave 28B Slave 29B
31 Slave 30B Slave 31B
Byte
2
7
2
6
2
5
2
4
2
3
2
2
2
1
2
0
Flags
Input data Output data
F0 ConfigError Offline
F1 APF LOS master bit
F2 peripheral fault
→ configuration mode
F3 ConfigurationActive
→ protected operating mode
Tab. 11-19.
ConfigError: 0 = config ok
1 = config error
APF: 0 = AS-i power ok
1 = AS-i power fail
peripheral fault: 0 = periphery ok
1 = peripheral fault
ConfigurationActive: 0 = protected mode
1 = configuration mode
Offline: 0 = online
1 = offline
LOS-Master-Bit 0 = offline by config error deactivated
1 = offline by config error activated