EUCHNER AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor for 2 AS-i circuits - Manual (Page 95)

AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Operation in advanced display mod
Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG 95
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
This menu displays the diagnosis at the time the Safety Monitor was deactivated.
For additional information, please refer to the documentation.
9.6.4.3 ACTUAL CONFIG (Configuration for the external monitor)
Main menu || DIAGNOSIS || EXT MONITOR || VIEW CONFIG || MONITOR CONFIG ||
INT SAFETY MON
LAST DIAG CH1
CH1.: OFF
A COLOR
32 RED
33 GREY
34 YEL FL
....
HELP:
A DEVICE ADDRES
+ CHANGED
Complete: The complete diagnostic is read out.
DIAG INDEX: The diagnostic is shown as it was configured under the
"device_index_assignment" in ASIMON
Information!
If the diagnosis is read using DIAG INDEX, the device count begins at 0, otherwise at
32!
EXT MONITOR
LAST DIAGNOSIS
VIEW CONFIG