EUCHNER AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor for 2 AS-i circuits - Manual (Page 108)

108 Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Operation in advanced display mod
9.8.5 PARAMETER
Main menu || TEST || PARAMETER ||
This function displays the hexadecimal value of the current AS-i parameters for
all AS-i slaves.
The current AS-i parameters can be changed after selecting a slave address.
9.9 SETUP (configuration of the AS-i network)
Main menu || SETUP ||
In the "Setup menu", the following sub menus are available:
PARAMETER
| 1A - 0
2A - 2| 3A - F
4A - E| 5A - 3
⇓
OPERATION MODE
STORE ACTUAL CFG
FORCE OFFLINE
AUTO ADR ENABLE
ADR. ASSISTENT
AS-I CONTROL
LOS
CHIPCARD
LANGUAGE
FACTORY RESET
SMILEY
OPERATION MODE: operation mode of the AS-i master
STORE ACTUAL CFG: store current configuration
FORCE OFFLINE: switch AS-i Master to offline operation
AUTO ADR ENABLE: enable automatic address
ADR. ASSISTENT: AS-i address assistant
AS-I CONTROL: status of the control program
LOS: list of offline slaves
CHIPCARD: chipcard
LANGUAGE: select menu language
FACTORY RESET: reset to factory settings