EUCHNER AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor for 2 AS-i circuits - Manual (Page 114)

114 Subject to reasonable modifications due to technical advances Id.-No.: 103329 Issue date - 24.10.2008 EUCHNER GmbH + Co. KG
Kohlhammerstraße 16 • D-70771 Leinfelden-Echterdingen Tel. +49/711/75 97-0 • Fax. +49/711/753316
AS-i 3.0 PROFIBUS Gateway with integrated Safety Monitor
Operation in advanced display mod
9.9.10 Language (menu language)
Main Menu || SETUP || LANGUAGE ||
From this menu you can select the menu language. „X“ marks the currently se-
lected language.
9.9.11 FACTORY RESET (factory default settings)
Main Menu || SETUP || FACTORY RESET ||
This function can be used to reset the master to the factory default settings. The
“Reset” is done by selecting menu point DO RESET.
9.10 DISPLAY CONTRAST (set display contrast)
Main Menu || DISPLAY CONTRAST ||
This function allows you to set the display contrast.
• Use the arrow keys to select the line with the bar
• Confirm your selection with OK (bar flashes)
• Use the arrow keys to set the display contrast
• Use OK to apply the setting
The factory settings are invoked from the DEFAULT field.
LANGUAGE
ENGLISH X
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
FACTORY RESET
DO RESET
Warning!
This function should be used only in emergencies, since all previously set attributes are
set back to the factory setting and ,thus, secure communication and operation of the
masters with the AS-i network is no longer guaranteed.
Master and AS-i network have to be reconfigured after a successful "Reset".
For double masters the "Reset" acts on both AS-i masters!
DISPLAY CONTRAST
DEFAULT
__________________