Studio settings, Vivid, lustr+, fire and ice, studio hd, Studio – ETC Desire Series v1.6.0 User Manual User Manual
Page 83: Also, N o t e
4
Operation
77
Studio Settings
Vivid, Lustr+, Fire and Ice, Studio HD
The Studio profile produces only white light that is adjustable in brightness, white point, and
tint (green/magenta balance). The Studio profile can be operated in a stand-alone mode
from the user interface or can be controlled via DMX.
Operation From Home Status Screen (Studio Standalone)
When operating without an external control signal, the quality of the white light can be
adjusted immediately and directly via menu options on the home screen.
When fixtures are connected together and there is no external control signal, all
adjustments that you make on one fixture are automatically made on the connected
fixtures.
Figure-4.45 Studio Status Home Screen (Vivid, Lustr+, Fire and Ice, Studio HD).
•
To adjust the Intensity, select it in the menu and press [
] and then [
] or [
]. The
range is 0 to 100%.
•
To immediately set the Intensity to 0, press the [
] button. Pressing it again will return
it to the previously-set Intensity.
•
To adjust the White Point,
select it in the menu and press [
] and then [
]or [
]
.
The range is 2700 to 6500K.
•
To adjust the Tint, press select it in the menu and press [
]and then [
] or [
].
Pressing [
] increases magenta and [
]increases green.
•
To return to the Main Menu, press [
].
•
To return to the Studio status screen from the Main Menu, press [
].
N o t e :
Studio profile is the default Quick Setup for fixtures containing the Studio HD LED
array. Fixtures with other LED arrays may also be operated in Studio profile by
selecting this setting from Quick Setups or DMX Settings. Fixtures with Studio HD
LED arrays may also be operated in other setups.
Studio
Intensity
:
System OK
STUDIO MODE
4/5 Intensity
WhitePoint:
3200K
40%
100%
Tint: