ETC Desire Series v1.6.0 User Manual - Manual (Page 66)

60 Desire Series v1.6.0 User Manual
Step 1: On the Presets and Sequences menu, scroll to Presets.
Step 2: Press [ ].
Step 3: With Preset selected, press [ ].
Step 4: Press [ ] or [ ] to set the desired preset number.
Step 5: Press [ ].
Step 6: Press [ ] to select Status.
Step 7: Press [ ] to activate the Preset.
The action changes to Active and an asterisk (*) displays in front of the preset
number.
Fade Time
Fade time is the length of time the fixture takes to crossfade from the previous setting to the
Preset. The format is MM:SS. The default is 2 seconds.
Step 1: On the Presets menu, scroll to Fade Time and press [ ].
Figure-4.17 Selecting Fade Time on the Presets Menu.
Step 2: Press [ ] or [ ] to set the desired time in minutes.
Step 3: Press [ ].
Step 4: Press [ ] or [ ] to set the desired time in seconds.
Step 5: Press [ ].
N o t e : You cannot activate a Preset if the fixture is receiving an external DMX control
signal.
Presets
Preset: * 23
Status: Active
Fade Time : 00:02
Delay Time: 00:00
Edit Color
Copy to Other Fixture
Save DMX as Preset