ETC Desire Series v1.6.0 User Manual - Manual (Page 65)

4
Operation 59
Presets (Vivid, Lustr+, Fire and Ice, Studio HD)
A Preset is a single, static look or color mix. The Desire Series fixtures come with 24 default
configurations. Only one Preset can be active at a time. You can activate any of the Preset
color mixes and customize each one. The following table lists the default Preset color
mixes, most of which are also available as Quick Color options. See “Quick Color (Vivid,
Lustr+, Fire and Ice, Studio HD)” on page 68.
Presets (Studio Daylight and Studio Tungsten)
The Desire Studio Daylight and Studio Tungsten fixtures come with 24 available slots for
Presets. Only one Preset can be active at a time. You can activate any of the Presets and
customize each one. Studio Daylight and Studio Tungsten fixtures have Presets that can
define both Intensity and Strobe values. There are no default Presets that come pre-
configured from the factory.
Figure-4.16 Selecting Presets on the Presets and Sequences Menu.
Preset Default Color Available as Quick Color
1 White Yes
2 Warm Yes
3 Cool Yes
4 Minus Green Yes
5 Lite Pink Yes
6 Lite Gold Yes
7 Yellow Yes
8 Dark Straw Yes
9 Dark Amber Yes
10 Orange Yes
11 Red --
12 Med Pink Yes
13 Dark Pink Yes
14 Magenta --
15 Purple Yes
16 Dark Lavender Yes
17 Deep Purple Yes
18 Clear Blue Yes
19 Lite Blue Yes
20 Med Blue Yes
21 Primary Blue Yes
22 Blue-Green Yes
23 Lite Green Yes
24 Green --
Presets
Preset : * 23
Status: Active
Fade Time:
00:02
Delay Time: 00:00
Edit
Copy to Other Fixture
Save DMX as Preset
Presets and Sequences
Focus: Off
Presets
Sequences
Quick Color
Preset 1 is Active
No Sequence is Active