Dmx profile, Strobe – ETC Desire Series v1.6.0 User Manual User Manual
Page 57
4
Operation
51
DMX Profile
The current DMX profile is displayed on the DMX Settings menu. You can customize the
setting by selecting a different profile. For detailed information about each profile, see
.
Step 1:
On the DMX Settings menu, scroll to DMX Profile.
Figure-4.5 Selecting DMX Profile on the DMX Settings Menu.
Step 2:
Press [
] to set the desired profile.
Strobe
Strobe adds another DMX channel of control at channel 5 (or channel 9 when operating in
a Direct Control profile). When enabled, the Strobe channel controls the fixture output as
follows.
Step 1:
On the DMX Settings menu, scroll to Strobe.
Figure-4.6 Enabling Strobe on the DMX Settings Menu.
Step 2:
Press [
] to toggle between On and Off.
Step 3:
Press [
] or [
] to commit the option.
DMX Value
Strobe Effect
0 Full
on
1 to 254
Variable rate from slow to fast
255
Full on
DMX Settings
DMX Start Address:
101
DMX Profile
: HSIC
Strobe: Enabled
Data Loss:
Instant
Plus Seven:
Enabled
DMX Profile:
6 chan
3/15 Saturation
DMX Settings
DMX Start Address:
101
DMX Profile:
HSIC
Strobe
: On
Data Loss:
Instant
Plus Seven:
On
DMX Profile:
6 chan
5/15 Strobe