ETC Desire Series v1.6.0 User Manual - Manual (Page 75)

4
Operation 69
Figure-4.31 XYZ Status Screen Showing Master.
Slave
Any fixture in the data chain that is being controlled by the master fixture. By default, all
fixtures are slaves, except the one that had its Preset, Sequence, or Quick Color altered
most recently. A Slave fixture can only directly imitate the performance of the Master fixture.
When operating as a Slave fixture, the fixture displays Slave on its home screen.
Diagnostics
The Diagnostics menu provides access to detailed information about various aspects of the
fixture’s performance. Diagnostics also provides access to test functions and fixture
recalibration. Much of the Diagnostics menu is used by service technicians to troubleshoot
problems.
Step 1: From the home screen, press [ ] to open the Main Menu.
Step 2: Scroll to Advanced Settings.
Step 3: Press [ ].
Figure-4.32 Selecting Diagnostics on the Advanced Menu.
Current DMX In
The Current DMX In screen displays the values of the current DMX input by channels. The
values dynamically change as the DMX input changes. This screen is a read-only screen,
which displays the following.
• The Control Input setting.
• The DMX channel assignment, in order.
• The current DMX value (0-255) of each control channel in use by the fixture.
• The current brightness (0 to full or 00 to FL) of each series of LEDs in the fixture's LED
array.
Step 1: On the Diagnostics screen, scroll to Current DMX In.
Step 2: Press [ ].
Studio
Master
Preset 1 is Active
System OK
No Sequence is Active
Studio Prt Lin –– Str
1/5 Intensity
Advanced Menu
DMX Settings
LED Settings
Presets and Sequences
Diagnostics
Local Settings
Copy All Settings
Diagnostics
Current DMX In
Network Statistics
Test
Recalibrate Fixture
About Fixture