Toshiba Tekbright 700P - Manual (Page 43)

43 Getting Started
Configuring wireless access
5.375 x 8.375 ver 2.1
❖ When your wireless interface supports 128-bit RC4
encryption and you selected hexadecimal format in
step 2 , enter a 26-digit hexadecimal value.
4 Select the key you wish to enable at this time.
5 Click Apply to save the changes.
Configuring access control
You can control wireless access to your network by
specifying each wireless client’s MAC address. MAC
addresses are 16-digit hexadecimal identification numbers
assigned to networking devices, such as adapters, at the
factory. Each adapter has a unique MAC address that cannot
be changed. The MAC address is usually printed on a label on
the back of the adapter.
Limiting network access to specific MAC addresses provides
additional security and improves network performance by
filtering extraneous traffic.
1 Open the Administration Web site, click the Network
tab, then select Wireless.
2 Make sure the Enable Access Control check box is
selected, then click the Configuration link next to it.
The MAC address configuration screen appears.
3 To add a new MAC address to the list, enter the 16-digit
value in the New MAC Address field, then click Add.
4 To delete a MAC address from the list, click the address
you wish to delete, then click Delete.
5 Click Apply to save the changes, otherwise click Cancel.
Using SSL
By enabling SSL (Secured Sockets Layer), the main URLs
for the Administration Web Site and the Digital Central Web
site will be redirected to an HTTPS (Secure HTTP) Web site.
HTTPS will encrypt your connections to these sites, thus