Toshiba Tekbright 700P - Manual (Page 274)

282 Manually Configuring Clients for the Magnia SG20
Manually configuring clients with Windows NT 4.0, Windows
2000 and Windows XP operating systems
5.375 x 8.375 ver 2.1
3 If the Workgroup box does not contain the word
“SAWORKGROUP,” your network settings must be
configured.
Configuring your network settings
1 Click Start, Settings, Control Panel, and double-click
the Network icon.
The Network Properties dialog box appears.
2 Click the Protocols tab.
3 In the Network Protocols list, select TCP/IP Protocol,
then click Properties.
4 When the TCP/IP Properties dialog box appears, click the
IP Address tab.
5 From the drop-down Adapter list, select the adapter that
you wish to use for connecting to the Magnia SG20.
NOTE: If Specify IP Address is selected, and you have numbers in
the IP Address box or the Subnet Mask box, write them down now.
6 Select the option Obtain an IP Address Automatically.
7 Click OK to close the TCP/IP Properties dialog box.
8 Click the Identification tab.
9 Verify that the computer name displayed is unique for
your network.
10 If it is not a unique name, click Change and change it to
one that will not be used by any other computer.
NOTE: Write down the existing Domain or Workgroup name.