Toshiba Tekbright 700P - Manual (Page 260)

268 Manually Configuring Clients for the Magnia SG20
Manually configuring clients using the Windows 95, 98 and
Windows Me operating system
5.375 x 8.375 ver 2.1
Determine network settings
To determine the client computer network settings:
1 Click Start then Run.
2 In the Run dialog box, type winipcfg in the Open box, and
click OK.
If you get a message that says “Cannot find the file
‘winipcfg’…”, you may need to install TCP/IP, see step 3
below.
If the IP Configuration window appears, click Release
All, then click Renew All.
If the Default Gateway field does not contain the text
“192.168.1.1” you must configure your network settings.
3 Click Start, then Programs.
❖ For Windows
®
95 or Windows
®
98 operating
systems:
click MS-DOS Prompt.
❖ For the Windows ® Me operating system:
select Accessories then click MS-DOS Prompt
4 When the MS-DOS ® Prompt window opens, type:
ping 192.168.1.1 and press Enter .
If the words “Request timed out” or
“Bad command or file name” appear in the window, you
must configure your network settings.
5 Click Start, Settings, Control Panel and double-click
the Network icon.
The Network Properties dialog box appears.