Toshiba Tekbright 700P User Manual
Page 137
140
VPN Configuration and Usage
Configuring a Client Computer
5.375 x 8.375 ver 2.1
❖
A static public IP address.
WARNING: If your server’s IP address or workgroup changes, the
program used to create a Client Setup Diskette must be
downloaded again so it contains the correct IP address. If you are
using a client setup diskette that was configured on a Magnia
SG20 using a DHCP IP address, a warning message will display
during setup. At that point, you can select to reconfigure your
server or continue with configuration.
To communicate via VPN with a Microsoft Windows client
over the Internet, the client computer must be:
❖
Running Windows 95/98/Me/NT/2000/XP operating
system (Macintosh operating systems are not supported
at this time)
❖
Connected to the Internet via a broadband or dial-up
connection
❖
A computer that is not directly connected to the Magnia
SG20 server.
TECHNICAL NOTE: Installing on a client system running Window
95 may require you install the Dial Up Networking 1.3
Performance and Security Update. To verify whether this upgrade
is needed, see