Toshiba Tekbright 700P - Manual (Page 220)

226 Advanced Networking Features
5.375 x 8.375 ver 2.1
SNMP Port
to Use 161 This is the port that
the SNMP Agent will
listen to and respond
through. The default
is the standard value
for SNMP, but it can
be changed if the
NMC has been cus-
tomized for a differ-
ent port. Yes
Enable Traps Uncheck
ed If this box is checked,
Traps will be sent to
the NMC. Yes
Port to use
for SNMP
Traps 162 This is the port at the
IP Address that trap
messages will be sent
to. If
“Enabled
Traps” is
set, this
field is
required.
Address to
Report Traps
To No
default This is the IP Address
that trap messages
will be sent to. If
“Enabled
Traps” is
set, this
field is
required.
System
Location My
Server Can be used to indi-
cate the location in
the network of the
Magnia Server. This
is a documentary text
string. No
Value Default Comments Required