Toshiba Tekbright 700P - Manual (Page 215)

221 Advanced Networking Features
5.375 x 8.375 ver 2.1
Magnia SG20 shares could be visible to the other systems in
the corporate LAN.
To set up a network in this configuration, a Magnia SG20 is
connected to a corporate LAN (or a DSL/Cable connection to
the Internet) using the public port. A routable subnet is then
configured / purchased for the Magnia SG20. The following
configuration steps should be taken:
1 Turn NAT off
2 A local IP range is established for the private clients
(DHCP could remain active).
3 An IP from the private subnet is entered for the server
private port.
4 An IP from corporate LAN is used for the public port (or
DHCP can be used)
5 Lower the Magnia SG20 firewall only if the Magnia
SG20 shares are to be accessed from a corporate network
(do not lower firewall if connected directly to the Internet
through a connection such as DSL or Cable).
6 The subnet IPs is adjusted based on the size of the subnet
being routed by the SG20.