Toshiba Tekbright 700P - Manual (Page 213)

219 Advanced Networking Features
5.375 x 8.375 ver 2.1
If NAT is on, the Network Address Translation screen
displays only the single check box (it will be checked) to
enable or disable the feature. To turn NAT off, uncheck the
box. When the box is unchecked, fields to set a variety of IP
addresses will appear, including:
❖ Primary DNS
❖ Primary WINS
❖ Default Gateway
❖ Secondary DNS
❖ Secondary WINS
All these IP addresses must be filled in with appropriate
values for the network. The default values set the Magnia
SG20 as the server providing these services. These defaults
can be retained unless there is a specific alternate server to be
used for one of these services.
Configuring Multiple Magnia SG20s on a Single
Network
One possible use of the advanced networking options is to
allow multiple Magnia SG20s to exist in a single small
business network. In this case, all clients require access to
both servers, but some server functions may need to be
disabled on one of the two servers.
Before connecting the two servers, make the following
configuration changes on the servers:
1 Turn off DHCP on the second server.
2 On the server with DHCP turned on, make sure there are
at least two IPs not assigned in the range (for example,
start the IP range at 192.168.1.3).
3 Assign each server private port an IP from the local IP
range. For example, the first server may be 192.168.1.1,
and the second one may be 192.168.1.2.