Toshiba Tekbright 700P - Manual (Page 284)

293 Configuring a Macintosh as a Client
Configuring a Macintosh client
5.375 x 8.375 ver 2.1
User Accounts
As the server for your local area network, the Magnia SG20
requires accounts with user names and passwords for each of
your users. To log in to the Magnia SG20 as a specific user,
you must first be logged in to your client computer as that
same user.
NOTE: The user name and password must match on both
computers.
Using your current user name and password
If you are setting up an existing user:
1 Start Netscape Communicator.
2 In the Netsite address line, type http://Myserver.loc and press
Enter.
HINT: You can also use the address http://192.168.1.1.
3 From the Toshiba Appliance Administration page, click
the System tab. Once the System page displays, click
Users.
The Enter Network Password dialog box appears.
4 If this will be the first user added to the system, type the
user name applianceadmin and the password
toshiba .
If this is not the first user, enter the user name and
password of the level 3 user with which you wish to log
in.