Toshiba Tekbright 700P - Manual (Page 20)

20 Getting Started
Quick start procedure
5.375 x 8.375 ver 2.1
Quick start procedure
If you have already planned your network and are an
experienced computer user, this section provides all the
information you need. Otherwise, read
“Planning your
network” on page 67 before installing the Magnia SG20, and
begin the installation process with “Unpacking the Magnia
SG20” on page 21 .
The basic steps for installing the Magnia SG20 are:
1 Unpack all components.
2 Assemble the additional components you will need:
network cables or wireless network card for client
computers, printer cable (if you’re connecting a network
printer), and telephone cable or Ethernet
®
cable (for
connecting to the Internet).
3 Locate and identify all ports.
For more information, see “Finding your way around” on
page 23 .
4 Turn on the Magnia SG20.
5 Connect the first client computer.
6 Connect a printer to the parallel port on the Magnia SG20
(optional).
7 Connect the Magnia SG20 to your Internet connection
(such as phone line to the modem, Ethernet connection
from cable or DSL modems to the public Ethernet port).
8 Run the Client Setup Wizard on the client computer.
(Insert the Toshiba Magnia SG20 “Client Setup- and
Documentation CD”. The CD program runs
automatically.) Select the option Connect this PC to your
Magnia SG20.)
9 Configure the Magnia SG20. (When you configure the
first client computer, the Server Setup Wizard runs
automatically after the Client Setup Wizard has finished.)