Toshiba Tekbright 700P - Manual (Page 155)

158 VPN Configuration and Usage
Connecting to the VPN
5.375 x 8.375 ver 2.1
3 Check the IPSec VPN Access check box, and then click
Apply to turn on the VPN feature.
4 Click the Configure hyperlink to configure the VPN.
This will display the list of existing IPSec configurations
you have created. The first time you enter this screen, the
list will be empty.
5 You can add your first (and subsequent) IPSec
connection definitions by clicking the Add button. This
will display the IPSec configuration screen.
Sample IPSec configuration screen
The top part of the IPSec configuration screen displays
the information describing the local side of the VPN
connection. This is read only information; you cannot
change the IP information (it is picked up from your local
IP address information).
The bottom part of the screen is where you describe the
Magnia SG20 to which you will be connecting. Complete
the following fields:
❖ Connection Name: A name of your choosing. This name
is used to identify the IPSec connection configuration.