Display and screen, Display and screen -4, Nothing appears on the screen -4 – Toshiba Satellite 31 User Manual
Page 99: Nothing appears on the screen
8-4 Troubleshooting
User's Manual
Satellite 30DVD/35DVD – S30DVD_UK.doc – ENGLISH – Printed on 16/10/00 as IM_30UK
Display and screen
Nothing appears on the screen
Nothing appears on the screen (The Power (On/Off) light is
off or it is blinking)
The computer is turned off or in Standby mode. Please press the Power
Switch.
Nothing appears on the screen (The Power (On/Off) light is
glowing)
Please follow the steps below:
Press Shift or Ctrl.
Move the mouse or use the touch pad
If you have a CRT monitor connected, it can take up to 10 seconds before
the output is displayed, this is not a defect.
The instant security function (automatic display stop) is carried out.
Please follow the steps below:
If no password is set.
Press Enter or F1.
If a password is set.
Type in the password and press Enter.
In case you have forgotten the password, please seek assistance from
Toshiba, after confirming the model you are using.
The display device is not set up properly. Please change the display.
The colours don't look good
You only set a small number of colours. Please follow the steps below:
1. Open the Control Panel and double click on Display
2. In the Settings tab, change the Colours to High Colour or True Colour
3. Click on the OK button
Depending on the resolution, sometimes you cannot set to "High Colour"
or "True Colour".