Toshiba Satellite 31 - Manual (Page 73)

4-20 Hardware User's Manual
Satellite 30DVD/35DVD – S30DVD_UK.doc – ENGLISH – Printed on 16/10/00 as IM_30UK
Printer
A printer with parallel interface is connected to the parallel port. A USB
conform printer can also be connected to the USB port. For details on the
connection and setup of a printer, please refer to your printer's manual.
Installation
For the connection to the parallel port, please follow the steps below.
Switch off the computer as well as the printer to perform the connection.
1. Insert the plug of the printer cable into the parallel port on the
computer.
2. Connect the plug on the other side of the cable with the printer
Turn on the printer first and then turn on the computer.
Printer setup
Installing the driver
To use the printer, you have to install the driver. Please install the driver
according to your printer's manual.
Setting up the printer port mode
You have to setup a printer port mode that is suitable for your printer.
1. Start the BIOS Setup.
For starting the BIOS Setup, please refer to "How to start the BIOS
Setup"
2. In the System Devices menu, under Parallel port, select Enabled or
Auto.