Toshiba Satellite 31 - Manual (Page 88)

User's Manual BIOS Setup 6-9
Version
7
Last Saved on 16/10/00 18:34
Satellite 30DVD/35DVD – S30DVD_UK.doc – ENGLISH – Printed on 16/10/00 as IM_30UK
Parallel port
For setting the PRT port.
Disabled
Not activated
Enabled
Activated
Auto
Detects automatically
Mode
This is displayed when the Parallel port is set to Enabled.
Bi-directional
For using peripheral devices that support the two
way mode.
EPP
For using EPP compliant peripheral devices
Normal Mode
For using peripheral devices that are used in the
preferred output mode.
Base I/O address
This is displayed when the Parallel Port is set to Enabled.
Please do not assign it to the same address like the [Base I/O address] of
the Infrared Port.
378 / 278 / 3BC
Interrupt
This is displayed when the Parallel Port is set to Enabled.
IRQ 5 / IRQ 7
DMA channel
This is displayed when the Parallel Port is set to Enabled and ECP is
selected in Mode.
Please do not select the same channel as the [DMA channel] for the
Infrared Port.
DMA 0/ DMA 1/ DMA 3