WIKA CPC6000 - Manual (Page 3)

Automated Pressure Calibrator
CPC 6000
Mensor/WIKA Operating Instructions - CPC 6000 3
TABLE OF CONTENTS Page
1. General Information 7
1.1 Warranty 7
1.2 Important Notice 7
1.3 Compliance 7
1.4 Trademarks and Copyrights (C) 8
1.5 Software License Agreement 8
1.6 Mensor Service Plus 8
1.6.1 After the Warranty 8
1.6.2 Calibration Services 9
1.6.3 Accreditations 9
1.7 Packaging for Shipment 9
2. Safety Notices 11
2.1 User Responsibilities 11
2.2. General Safety Notices 11
2.3 Warnings and Caution Notices 12
3. Product Description 13
3.1 General Description 13
3.2 Features 14
3.3 Front Panel 14
3.4 Display 15
3.5 Electrical Module 17
3.6 Pneumatic Module 18
3.7 Chassis Assembly 19
3.8 Electrical Block Diagram 20
4. Specifications 21
4.1 Measure Specifications 21
4.2 Control Specifications for the Pump Regulator Module 22
4.3 Control Specifications for the Solenoid Valve Regulator Module 23
4.4 General Specifications 24
5. Installation 25
5.1 Unpacking the System 25
5.2 Dimensions 25
5.3 Mounting 25
5.4 Rear Panel 26
5.5 Pressure Connections 27
5.5.1 Supply Port 27
5.5.2 Measure/Control Port 27
5.5.3 Exhaust Port 28
5.5.4 Reference Port 28
5.5.5 Remote Bus Connections 28
5.5.6 Digital I/O Connection 28
5.6 Turning on the CPC 6000 28