Kramer Electronics VS-3232DN - Manual (Page 73)

VS-3232DN - Communication Protocols 69
16.1.8 Table of Protocol 3000 Commands
Command
Short
Form
Description Permission
# Protocol handshaking End User
BUILD-DATE? Read device build date End User
CPEDID
Copy EDID data from the output to the input
EEPROM
Common
DISPLAY Valid / Invalid output Switch
DISPLAY? Read if output is valid Switch
FACTORY Reset to factory default configuration Common
FCT-MODEL Set model name Common-mandatory
FCT-SN Set Serial Number Common-mandatory
GEDID Read EDID data Common
GEDID-EXT
Read EDID data from external device
connected to output
Common
HELP List of commands Common-mandatory
IDV Visual identify device Common
INFO-IO? Read in/out count Switch
INFO-PRST? Read max preset count Switch
LDEDID Load EDID data Common
LDFW Load new firmware Common
LOCK-FP LCK Lock front panel Common
LOCK-FP? LCK? GET Lock front panel Common
MODEL? Read device model End User
P2000 Switch to protocol 2000 Common
PROT-VER? Read device protocol version Common
PRST-LST? PLST? Read saved presets list Switch
PRST-RCL PRCL Recall saved preset Switch
PRST-STO PSTO Store current connections to preset Switch
PRST-VID? PVID? Read video connections from saved preset Switch
RESET Reset device Administrator
SIGNAL Valid / Invalid input Switch
SIGNAL? Read if input is valid Switch
SN? Read device serial number End User
VERSION? Read device firmware version End User
VID V Switch Video only Switch
VID? V? Get Video switch state Switch
Note: Not every command listed by the Help command is relevant to every matrix
configuration.