Kramer Electronics VS-3232DN - Manual (Page 35)

VS-3232DN - Using the Configuration Menus 31
8.1.6 Setup Menu—6: recall setup XX, Recalling a Preset
This option recalls a stored configuration from a preset (1 to 59).
To recall a stored configuration:
1. Press MENU.
The Setup Menu options are displayed.
2. Press 6 (RCL) on the numeric keypad (see Figure 1 ).
The following is displayed:
recall <= __
3. Using the numeric keys, enter the preset (in this example, 02) to recall.
The following is displayed:
Wait …..
After a few seconds, the following is displayed on the right hand side:
CONFIRM
RECALL <= 02
The TAKE button flashes.
4. Press TAKE.
The preset is recalled.
The display reverts to the output/input display.
8.2 Using the Config Menu
The Config Menu provides access to configuration settings that are not regularly
changed and comprises the following options:
•
Input signal detection ( Section 8.2.1
•
Input port parameter setting (see
)
Section 8.2.2
•
Output load detection (
)
Section 8.2.3
•
Output port parameter setting (see
)
Section 8.2.4
•
Interface configuration (
)
Section 8.2.5
•
Interface Reply configuration (
)
Section 8.2.6 )