Kramer Electronics VS-3232DN - Manual (Page 24)

20 VS-3232DN - Operating Your Video Matrix Switcher
The ESC button is used to cancel an operation without affecting the current status.
For example, if you enter an incorrect number by mistake, press the ESC button to
cancel the operation.
Note: At any stage, if no button is pressed within approximately 15 seconds, the
automatic timeout causes the VS-3232DN to exit the operation and revert to the
output/input display.
7.3 Confirming Actions
You can choose to work in the At Once (default) or the Confirm mode.
For all actions except storing/recalling.
In the At Once mode:
•
The TAKE button does not light
•
Pressing an OUT-IN combination implements the switch without further user
confirmation
•
You save time as execution is immediate and actions require no user
confirmation
•
No protection is offered to correct an erroneous action
In the Confirm mode:
•
The TAKE button lights
•
You enter an action and then confirm it by pressing the TAKE button
•
Every action requires user confirmation, protecting against erroneous
actions
•
Execution is postponed until you confirm the action
Failure to press the TAKE button within a few seconds results in the action timing out
automatically