Kramer Electronics VS-3232DN - Manual (Page 3)

VS-3232DN – Contents i
Contents
1 Introduction 1
2 Getting Started 2
2.1 Achieving the Best Performance 2
3 Overview 3
3.1 Defining EDID 4
3.2 About the Power Connect™ Feature 4
4 Defining the VS-3232DN 32x32 Digital Matrix Switcher 5
5 Installing in a Rack 10
6 Connecting the VS-3232DN 11
6.1 Port Numbering 12
6.2 Serial Data on DGKat Plus RS-232 Cards 14
6.3 Connecting to the VS-3232DN via RS-232 14
6.4 Connecting to the VS-3232DN via Ethernet 15
7 Operating Your Video Matrix Switcher 18
7.1 Startup Display 18
7.2 Using the Selector Buttons 19
7.3 Confirming Actions 20
7.4 Switching Actions 21
7.5 Locking the Front Panel Buttons 24
7.6 Redundant Power Supplies 25
8 Using the Configuration Menus 26
8.1 Using the Setup Menu 26
8.2 Using the Config Menu 31
9 Configuring the Number of Installed Input and Output Ports 43
10 Installing and Using the Test Module to Troubleshoot Video Problems 44
10.1 Installing the Test Module 44
10.2 Setting the Resolution of the Generated Video 45
10.3 Setting the Pattern of the Generated Video 46
10.4 Using the Test Module to Troubleshoot Video Problems 46
11 Hardware Installation Instructions 49
11.1 I/O Card Installation 49
11.2 Power Supply Installation 51
12 Upgrading the VS-3232DN Firmware 53
13 Technical Specifications 54
14 Default Communication Parameters 55
15 Factory Default EDID 56
15.1 DVI Input Card 56
15.2 DVI (HDCP) Input Card 57
15.3 HDMI Input Card 58
15.4 DVI Dual Link Input Card 60
15.5 DGKat Input Card 62
15.6 Fiber Optic F670 Input Card 64
16 Communication Protocols 66
16.1 Protocol 3000 66
16.2 Protocol 2000 70