Kramer Electronics VS-3232DN - Manual (Page 28)

24 VS-3232DN - Operating Your Video Matrix Switcher
7.4.4 Turning Off Several Outputs
To turn off several outputs in the Confirm mode, repeat the switching actions
described in Section 7.4.2
7.4.5 Recalling the Default Setup
but set the inputs to 00.
You can store a commonly used setup as the default setup (see Section 8.2.8
Note: This is not the setup that is loaded when the unit is turned on. When the unit
is turned on, the setup that was last used before the unit was turned off is loaded.
)
which can be recalled at any time.
To recall the default setup:
1. Press DEFAULT SETUP.
The DEFAULT SETUP button flashes and the following message is
displayed:
recall DEFAULT setup
press FLASHING button to confirm
2. Press DEFAULT SETUP.
The following message is displayed:
all Setups and Connections change
press TAKE to confirm
•
The TAKE button flashes.
3. Press TAKE.
The default setup is recalled and the display reverts to the output-input
display.
7.5 Locking the Front Panel Buttons
You can lock the VS-3232DN to prevent tampering with the unit or prevent the
settings from being changed accidentally via the front panel buttons.
You can still remotely operate via RS-232 or Ethernet even when the front panel is locked