Kramer Electronics VS-3232DN - Manual (Page 46)

42 VS-3232DN - Using the Configuration Menus
5. Press TAKE and wait a few seconds.
The following is displayed:
Are you Absolutely sure !!!
Once more TAKE to confirm
6. Press TAKE.
The following is displayed:
Matrix erased!!!
Please, wait …
The matrix and device configuration are erased. After a few seconds the next
option on the Config Menu is displayed.
8.2.10 Config Menu—Display Firmware Versions
This option displays the main and front firmware versions.
To display the firmware versions:
1. Press MENU twice.
The following message is displayed:
start configuration menu
MENU to view setup ENT to change them
2. Press MENU until the following is displayed:
Main Firmware Version: 1.0
Front Firmware Version: 1.0
3. Either press BREAKAWAY to exit the Config Menu or wait approximately 15
seconds for the operation to time out.