Kramer Electronics VS-3232DN - Manual (Page 58)

54 VS-3232DN - Technical Specifications
13 Technical Specifications
BANDWIDTH: Supports up to 3.2Gbps bandwidth per channel (limited
by the cards installed)
MAX RESOLUTION: Up to UXGA; 1080p
CONTROLS: Front panel buttons, Infrared remote control transmitter,
RS-232, Ethernet
OPERATING TEMPERATURE: 0° to +55°C (32° to 131°F)
STORAGE TEMPERATURE: –45° to +72°C (–49° to 162°F)
HUMIDITY: 10% to 90%, RHL non-condensing
DIMENSIONS: 19” x 14.2” x 6U (W, D, H) rack-mountable
POWER CONSUMPTION: 100-240V AC, 50/60Hz, 320VA
WEIGHT: 13.0kg (28.7lbs) approx
ACCESSORIES: Power cord, Infrared remote control transmitter
OPTIONS: PS-1DN redundant power supply
Specifications are subject to change without notice at http://www.kramerelectronics.com
The following table lists the technical specifications of the cards that are
compatible with the VS-3232DN chassis.
MAX RESOLUTION: Up to UXGA; 1080p, 1920x1200
Card Ports Data Rate
per
Channel Compliance HDMI Support 3D Pass
Through
Features HDTV
Compatible
DVI 4 DVI 1.65Gbps DVI 1.0
Kramer
Equalization
& re-
Klocking™
Technology
Yes
DVI Dual
Link 4 DVI 3.3Gbps DVI 1.0
HDCP 4 HDCP 2.25Gbps
HDCP/HDMI
V.1.4 with
Deep Color,
x.v.Color™
Yes
HDMI 4 HDMI 2.25Gbps
DVI (4LC
Fiber Optic) 4 4 LC 1.65Gbps DVI 1.0
DVI
(SC Fiber
Optic) 4 SC 2.25Gbps DVI 1.0
DGKat plus
RS-232 4 RJ-45
TP,
4 3-pin
terminal
blocks Video:
1.65Gbps
Serial
Data:
19200 DVI 1.0
For the DVI 4LC, multi-mode glass fiber cables with LC connections must be used,
such as the Kramer C-4LC/4LC.
For the DVI SC, Multi-mode glass fiber cables with SC connections must be used,
such as the Kramer C-SC/SC/OM3.
For DGKat plus RS-232, shielded TP pair cables with RJ-45 connections must be
used, such as the Kramer BC-DGKat623 or BC-DGKat7a23.