Changing the rapid wake (sleep mode) settings, How to use, Search – Sony SVS1511BFXB User Manual

Page 150

VAIO User Guide SVS13A1/SVS1311/SVS1511 Series

Back

How to Use

Changing the Rapid Wake (Sleep Mode) Settings

You can change the Rapid Wake settings on

VAIO Control Center.

Rapid Wake is enabled by default. With this function, you can keep your VAIO computer in

Sleep mode without risk of data loss because the computer enters Sleep mode after your

working data is saved on the built-in storage device.

For models that support Rapid Wake + Eco, you can conserve more battery power by

reducing power consumption when the computer is in Sleep mode.

1. Click (Start), All Programs, and VAIO Control Center.
2. Click Power Management and Rapid Wake.

Click to select or clear the check box for Rapid Wake.

Select the check box to enable Rapid Wake or clear it to disable the function.

Note

With Rapid Wake disabled, your working data is not saved on the built-in storage device

when the computer enters Sleep mode. Therefore, if the computer is turned off during

Sleep mode because, for example, the battery pack runs out of power or the computer is

disconnected from an AC power source, the working data will be lost and cannot be

restored. To avoid data loss, be sure to save the data before the computer enters Sleep

mode. With Rapid Wake disabled, the power indicator light blinks slowly in orange during

Sleep mode, and the charge and power indicator lights blink simultaneously when the

battery pack runs out of power during Sleep mode.

When you use the Hibernate mode, you need to disable Rapid Wake.

Related Topic

Using Sleep Mode

150

Search

This manual is related to the following products: